How long does coal last in a forge?

It really depends on your forge setup. My last forge was pretty small and one 50# bag would last me over 2 months, just forging on the weekends.

Can charcoal be used in a forge?

Charcoal is considered the least desirable fuel when blacksmithing. While readily available, charcoal may not even reach the necessary temperature to soften iron and steel without a lot of fuel and constant airflow. You can burn through a lot of charcoal quickly and still not achieve the proper temperatures.

What is the best coal for a forge?

Bituminous Coal

How hot can a charcoal forge get?

According to “Marks’ Standard Handbook for Mechanical Engineers”, 10th, coal gas burns at about 3,590°F (1,977°C) under 100% air conditions. More or less air will decrease the temperature. This means that the maximum temperature of a coal fire in a forge is about 3,500°F (1,927°C).

Does Coke burn hotter than coal?

Coal is a shiny, black fossil fuel that contains impurities, emits smoke when burned, and produces less heat than coke. Coke is a dull, black byproduct of coal that burns hotter and cleaner. … However, blacksmiths still rely on coke as an efficient source of fuel for the forge.

IT IS INTERESTING:  How is coal seam gas formed?

What is the best fuel for a forge?

Coal

What burns hotter charcoal or wood?

Charcoal has an energy value of around 29 MJ/kg, in other words charcoal burns hotter than wood, but when not insulated or not receiving sufficient air supply (including secondary air), the absence of flames or fast flowing CO2 gases will result in less efficient cooking due to a lower heat transfer efficiency (HTE).

Why is Coke used instead of coal?

Since smoke-producing constituents are driven off during the coking of coal, coke forms a desirable fuel for stoves and furnaces in which conditions are not suitable for the complete burning of bituminous coal itself. Coke may be combusted producing little or no smoke, while bituminous coal would produce much smoke.

Which is better coal or coke?

Coke is a better fuel because coke produces more heat on burning as compared to coal. Coke has higher calorific value than coal. When equal masses of coke and coal are bunt, coke produces more heat. Also when coke is burnt, smoke is not obtained whereas coal produces smoke on coal.

How much coal does a forge use?

How much coal do you need? Bit of a tricky question! This of course depends on how much forging you will be doing. If you are doing an afternoon of forging then 20 pounds of hardwood lump charcoal should be plenty and 5 pounds of coal should do.

What is the hottest Forge?

The hot forging manufacturing process is performed at extreme high temperature (up to 1150 °C for steel, 360 to 520 °C for al-alloys, 700 to 800 °C for cu-alloys).

IT IS INTERESTING:  Is charcoal good for dogs with diarrhea?

How hot can a wood forge get?

How Hot Does A Wood Blacksmithing Forge Get? It’s possible to get a campfire hot enough (without a bellow) to make a piece of steel glow a dull cherry red. This indicates the metal is roughly 1200 degrees Fahrenheit (649 Celsius).

Can you melt steel with charcoal?

The easiest way to melt metal into liquid is to heat it in a small, enclosed vessel that is heated from below. You can make your own using a small empty propane tank or metal bucket, plaster of paris, sand, metal pipe, charcoal briquettes, and a steel can.

Is Coke a clean fuel?

Coke is used as a fuel and as a reducing agent in smelting iron ore in a blast furnace. The carbon monoxide produced by its combustion reduces iron oxide (hematite) to the iron product. Although coke is more expensive than coal, it can be used in households as a clean fuel, relatively free of smoke and impurities.

Is there an alternative to coking coal?

This one is obvious – renewables! Blast furnaces need coal, but there is an alternative technology called an Electric Arc Furnace (EAF). This is responsible for approximately 30% of the world’s steel production and does not require coal.

What is the hottest burning coal?

Anthracite coal

Coal mine