What do you mean by coking coal?
Coking coal, also known as metallurgical coal, is used to create coke, one of the key irreplaceable inputs for the production of steel. There are many varieties of coal in the world, ranging from brown coal or lignite to anthracite. … Coke is produced by heating coking coals in a coke oven in a reducing atmosphere.
What is the difference between coking coal and non coking coal?
A non-caking coal is that coal which on heating in absence of air doesn’t from a coherent mass of residue. … A coking coal is that coal which on heating in absence of air leaves a solid residue. A non-coking coal also leaves a solid coherent residue which may not possess the physical & chemical properties of the coke.
What is caking and coking coal?
In coal utilization: Thermoplastic properties. … exhibit such behaviour are called caking coals. Strongly caking coals, which yield a solid product (coke) with properties suitable for use in a blast furnace, are called coking coals. All coking coals are caking, but not all caking coals are suitable for coke making.
What is the difference between Met coal and thermal coal?
Better quality met coal tends to have more of the reactive fusible components, resulting in stronger coke, while PCI coal tends to have low levels of fusible material. Met coal typically contains more carbon, less ash and less moisture than thermal coal, which is used for electricity generation.
What are 4 types of coal?
Coal is classified into four main types, or ranks: anthracite, bituminous, subbituminous, and lignite. The ranking depends on the types and amounts of carbon the coal contains and on the amount of heat energy the coal can produce.
Is Coke a fossil fuel?
Coal gas, coke and producer gas are the byproducts of coal and are not fossil fuels, except natural gas which is a fossil fuel.
What is Coke vs coal?
By distilling bituminous coal in retorts to obtain gas for illumination, or by burning it in kilns or pits, the residue left behind is called coke, which is simply coal charcoal, and is nearly pure carbon.
What is the best grade of coal?
The four ranks are: Anthracite: The highest rank of coal. It is a hard, brittle, and black lustrous coal, often referred to as hard coal, containing a high percentage of fixed carbon and a low percentage of volatile matter. Bituminous: Bituminous coal is a middle rank coal between subbituminous and anthracite.
Which coal has no caking power?
Non Coking Coal does not have any caking properties and it is mainly used as thermal coal for power generation. It has a higher ash content and also used in industries like cement, fertilizer, glass, ceramic, paper, chemical and brick manufacturing.
Which coal is used for making coke?
Almost all metallurgical coal is used in coke ovens. The coking process consists of heating coking coal to around 1000-1100ºC in the absence of oxygen to drive off the volatile compounds (pyrolysis). This process results in a hard porous material – coke.
Can iron ore be smelted without coal?
Coking coal is usually bituminous-rank coal with special qualities that are needed in the blast furnace. While an increasing amount of steel is being recycled, there is currently no technology to make steel at scale without using coal.
What is PCI coal used for?
Pulverised Coal Injection coal (PCI) – coal used for its heat value and injected directly into blast furnaces (without an intermediate coking phase) as a supplementary fuel, which reduces the amount of coke required and therefore costs. PCI coal can also be sold into the thermal coal market.
Is there an alternative to coking coal?
This one is obvious – renewables! Blast furnaces need coal, but there is an alternative technology called an Electric Arc Furnace (EAF). This is responsible for approximately 30% of the world’s steel production and does not require coal.
Can you make steel without coal?
The key message is this: it is possible to create low-emissions steel, without metallurgical coal. … Not to mention what products we can produce from the steel – adding value in many more ways than just exporting ore – and taking advantage of an increasing consumer demand for low carbon products.
Do they use coal to make steel?
Fortunately, only 70% of steel is made with coal today. The other 30% of the world’s steel production uses electric arc furnaces, fed with recycled steel or iron smelted with natural gas and hydrogen.